Windows Sp1 Error 0x800f0a12
Update ran like a charm after than and I'm at SP1. It might be related to this issue. rebooted, waited 10-15 mins for login screen to appear, got bored waiting and went for lunch. 5. It will have Ubuntu on it, but as its on OS on its own drive. his comment is here
So to boot to the sixth item in the list, the line would read GRUB_DEFAULT=5. Thanks! I have 2 hard drives, main one (640gig) and backup (80gb). By Ed Bott for The Ed Bott Report | February 24, 2011 -- 06:47 GMT (06:47 GMT) | Topic: Windows If you run Windows 7 and Linux on the same PC, https://blogs.technet.microsoft.com/joscon/2011/02/17/windows-72008-r2-service-pack-1-fails-with-0x800f0a12/
Service Pack Installation Failed With Error Code 0x800f0a12.
I note that after the update the permissions reverted to implicit deny. If that does not work will have to burn Ubuntu CD again and will have to do all the configuration, updates and tweaks again. If you experience difficulty installing Windows 7 SP 1 follow these troubleshooting steps. Using onboard Asus raid manager / with latest Asus/Intel driver etc.
- Thanks Gary Reply Mark Gonzalez says: March 6, 2011 at 4:32 am my partition flag is pretty weird (maybe because of reformatting).
- When I right-clicked the SYSTEM entry and set "Mark Partition as Active", it then indicated both were active.
- What is this flat metal sieve that came with my pressure cooker for?
Second, i don't have the System Reserved partition, though W7 had all the space it needed, why? Reply Greg from France says: June 13, 2013 at 1:48 pm Thank you it's working very well I just follow your explaination (automount enable then reboot and voilà !) Reply Skip Reply tpoco says: March 12, 2013 at 6:24 pm works for my Windows 2008 R2, thanks Reply Brrett says: March 15, 2013 at 10:25 am Had the issue with the service Windows 7 Service Pack 1 Offline Installer Now SP1 halted with the error this thread is about.
anyway, to use WinRE i'll need to prepare a UFD. Windows 7 Sp1 Error 0x800f0a12 Dual Boot There are only few windows only applications I need it for but I just need to learn live without those in the future. Many of us use an iSCSI connection to VMFS LUNS on storage from a Windows box to perform direct iSCSI SAN backup utilizing backup software such as Veeam, etc. http://answers.microsoft.com/en-us/windows/forum/all/error-0x800f0a12-when-attempting-to-install/a5801526-8b79-4431-b407-5a510e27cc5e One MUST have automount disabled in WIndows so that these VMFS LUNS don't get initialized by Windows.
You can boot into WinRE and use DISKPART to add a drive letter to your system reserved partition and then mark that as active. System Update Readiness Tool Februar 2011 um 08:44Windows 7 Service Pack 1 (SP1) was released to MSDN and Technet users and will be shortly available for general public. As you can see from this Disk Manager screenshot i51.tinypic.com/2133ij8.jpg C: is marked Active,Boot,System etc The fault is CLEARLY with the SP1 installer. So you have to set the boot flag to system (with gparted, for instance) Reply ArKay says: February 23, 2011 at 3:28 pm Again MS messed up.
Windows 7 Sp1 Error 0x800f0a12 Dual Boot
Those who set to 0 seem not to be able to get back into menu ever to fix things, except from liveCD. http://www.schiffner.com/how-to-solve-the-windows-7-sp1-800f0a12-0x800f0a12-update-error/ Does anyone have any suggestions? Service Pack Installation Failed With Error Code 0x800f0a12. Interested note, i hadnt been on my 10.04 Ubuntu probably since october, so when on it doing what you asked, there was like a list of 100 things that needed updating, Windows 7 Service Pack 1 Won't Install First, make a backup copy of /etc/default/grub.
I disconnected all hard disks from motherboard except from the one that is needed to boot windows, and the error is gone!:D Thanx a lot for the tip! My setup is: Disk 0, (160gb maxtor), Partition 1 ntfs where wind is installed spanning entire disk, marked active, crash dump, system, pagefile etc. (note: none of that partition for sys one reboot later and EVERYTHING works SmartON and the SP1 install. Reply Anonymous says: December 8, 2016 at 8:45 pm joscon: If I set it up correctly you should be able to download the entire CBS.log during the SP1 install attempt at: Windows 7 Service Pack 1 Download
None of these solutions did the trick, but yours did. Reply ↓ Andreas on April 24, 2013 at 7:57 am said: Thanks mate. As posted above you can do it from windows, or you can use gparted. weblink I set up my dualboot on two separate hard drives, so there's only one partition on my dedicated Windows drive.
Log in Forgotten Your Password? Windows 7 Service Pack 1 Download 64 Bit Cheers Reply nick says: March 26, 2011 at 2:45 pm Hello Joseph! Perhaps it updates the BCD template and and therefore wants to write to BCD to keep it consistent?
Running Win7 validated Ultimate 32bit.
Remember that the list always begins counting at 0. The system returned: (22) Invalid argument The remote host or network may be down. Type: ‘command prompt’ in the search box. ->When results appear, put right-click on ‘Command Prompt’. Kb976932 I run a BSD-derived operating system with Windows 7 on the same drive.
Reply Danielle says: February 23, 2011 at 2:39 pm For SP1 to install on multi boot machines, windows' system partition has to be active. Reply Drewfus says: March 15, 2011 at 2:41 pm The first case makes sense, although i believe that's a departure from ntldr which would default to loading C:Windowssystem32ntoskrnl.exe if boot.ini can't Reply Anonymous says: December 8, 2016 at 8:45 pm Okay, the suggestions have allowed the install to start and run about 16 minutes but then I now get, ERROR_SXS_ASSEMBLY MISSING (080073701). check over here Rebooted in windows, checked from third party tool and found that all ext3 partition created in extended partition are wiped out :'( 10.
Now I will try to fix my win7 SP1 installation with these instructions. Reply joscon [Microsoft] says: December 8, 2016 at 8:45 pm Awesome, glad that worked out for you. -Joseph Reply joscon [Microsoft] says: December 8, 2016 at 8:45 pm So Danielle, you But i did change the boot priority so it booted first from my 640Gb HDD (windows 7 OS) and tried the SP1 install and it worked perfectly. So, I followed Danielle's suggestion and looked at my hard drive with 'gparted'.
© Copyright 2017 umikey.com. All rights reserved.